Case Studies

From the Field: Customer Experience on the 2″ Badger



Our customer, Matthias Franze, with Buchen Umweltservice, in Merseburg, Germany provided us this great testimonial of how the StoneAge Tools 2″ Badger elevated the cleaning of a refinery in German by completing all tasks perfectly, regardless of the high level of contamination.

“We used the 2″ Badger nozzle for testing in one of the refineries in Germany. The nozzle was used to free pipelines DN 50 – DN 200 from petroleum coke. We operated the nozzle at approx. 950 – 980 bar and were delighted with the result. The nozzle coped perfectly with all tasks. All pipes could be cleaned with just one pass and in a very short time. This time, during the decoking process, there was an extremely high level of soiling, as the system had not been cleaned for 12 months. Normally, we perform decoking about every 6 months. Thus, the test of the nozzle was also under much more difficult conditions. For comparison, with a “normal” decoking we get 12-16 tons of petroleum coke from the entire system, in the last pass it was around 46 tons.

Wie besprochen hatten wir die 2″ Badger Düse zum Test in einer Raffinerie im Einsatz. Die Düse wurde genutzt um Rohrleitungen DN 50 – DN 200 von Petrolkoks zu befreien. Wir haben die Düse mit ca. 950 – 980 bar betrieben und waren vom Ergebnis begeistert. Die Düse hat alle gestellten Aufgaben tadellos gemeistert. Alle Rohrleitungen konnten mit nur einem Durchgang und in kürzester Zeit gereinigt werden. Im Rahmen der Entkokung kam es dieses mal zu extrem erhöhten Verschmutzungen, da die Anlage seit 12 Monaten nicht mehr gereinigt wurde. Im Normalfall führen wir die Entkokung ca. alle 6 Monate durch. Somit war der Test der Düse auch gleich unter wesentlich erschwerten Bedingungen. Zum Vergleich, bei einer “normalen” Entkokung holen wir aus der gesamten Anlage 12 – 16 to Petrolkoks, im letzten Durchgang waren es rund 46 to.